Sony DHC-MD373 Operating Instructions Manual page 23

4
Press ENTER/YES.
The track is programmed.
"Step" appears, followed by the number of
the track in the programmed sequence. The
number of the last programmed track
appears, followed by the total playing time of
the programme. If you have made a mistake,
you can clear the last programmed track from
the programme by pressing CLEAR.
Last programmed
track number
5
To programme additional tracks, repeat
steps 3 and 4.
6
Press H .
All the tracks play in the order you selected.
To check the total number of
programmed tracks
Press DISPLAY in stop mode. The total number
of programmed steps appears.
Last programmed Total number of
track number programmed steps
Total playing time
To check the programme order
Press . or > repeatedly during Programme
Play.
To Do this
Cancel Press x, then press PLAY MODE
Programme repeatedly until "PGM" and
Play "SHUFFLE" disappear.
Add a track to Do steps 3 and 4.
the programme
(in stop mode)
Erase the last Press CLEAR in stop mode. Each
programmed time you press the button, the last
track programmed track is erased.
To select the desired track using
the remote
Press numeric buttons instead of performing steps
3 to 5.
To enter track numbers 10 or over, press >10
(press twice to enter 100 or over) and the track
number. To enter 0, use the 10/0 button.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press H.
• "Program Full !" appears when you try to
programme 26 or more tracks (steps).
• "---m--s" appears when the total MD programme
time exceeds 200 minutes.
23