Programming Cd Tracks; Programme Play - Sony DHC-MD373 Operating Instructions Manual

Programming CD tracks

— Programme Play

You can make a programme of up to 25 tracks in
the order you want them to be played. You can
also make a Synchro Recording of the programme
on the MD (see page 26).
2
m
3
.
H
X
1
1
Press CD to switch the function to CD.
2
Press PLAY MODE repeatedly until
"PGM" appears.
3
Press . or > repeatedly until the
desired track appears in the display.
Selected track
number
`/1
4
M
3
>
6
x
Playing time of
the selected track
4
Press ENTER/YES.
The track is programmed.
"Step" appears, followed by the number of
the track in the programmed sequence. The
number of the last programmed track
appears, followed by the total playing time of
the programme. If you have made a mistake,
you can clear the last programmed track from
the programme by pressing CLEAR.
Last programmed
track number
5
To programme additional tracks, repeat
steps 3 and 4.
6
Press H.
All the tracks play in the order you selected.
To check the total number of
programmed tracks
Press DISPLAY in stop mode. The total number
of programmed steps appears, followed by the last
programmed track number and the total playing
time of the programme.
Last programmed
track number
Total playing time
Total playing time
of the programme
continued
17