Table of Contents
Advertisement
Connecting
optional AV
components
To enhance your system, you can connect
optional components. Refer to the
instructions included with each component
for details.
Connecting a VCR
Be sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected VCR, press FUNCTION repeatedly
until "VIDEO" appears.
By connecting the audio output jacks of your
VCR to the VIDEO (AUDIO) IN jacks, you
can enjoy video playback in powerful stereo
sound.
Moreover, if you connect the video/audio
input on the VCR to the VIDEO (AUDIO)
OUT and VIDEO OUT (or S VIDEO OUT)
jacks, you can record the audio and video
signals from a VIDEO CD onto video tape.
To the audio outputs
of the VCR using an
optional audio cable
To the
video input
of the VCR
using the
video cable
12
To the audio inputs of
the VCR using an
optional audio cable
To the S VIDEO input
of the VCR using an
optional S VIDEO cable
Connecting audio
components
Connecting a turntable
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected turntable, press FUNCTION
repeatedly until "PHONO" appears.
To the audio output of the turntable
Note
Using the turntable at high volume may cause
distortion or howling. This is often caused by the
bass sound from the speakers. The bass sound may
be picked up by the needle of the turntable, and
produce the distortion or howling. To avoid this, do
the following:
1 Keep some distance between the speakers and the
turntable.
2 Stop using the surround effect.
3 Install the speakers or the turntable on a firm and
stable surface.
4 Press SUPER WOOFER repeatedly until the
indicator on this button goes off.
Advertisement
Table of Contents
