Setting The Audio - Sony CMT-DH50R Operating Instructions Manual

JPEG RESOLUTION
You can select the resolution of JPEG
image files output from the HDMI OUT
jack.
SD : The system outputs standard
resolution images with a black frame.
HD : The system outputs HD
resolution images with a black frame.
HD: The system outputs the HD
resolution images without a black frame.
(1920 × 1080i)HD
outputs full size HD resolution images
with a black frame.
(1920 × 1080i)HD: The system outputs
full size HD resolution images without a
black frame.
Notes
 "JPEG RESOLUTION" is effective only when
you set "TV TYPE" in "VIDEO SETUP" to
"16:9, " and you set "HDMI RESOLUTION"
in "HDMI SETUP" to a resolution other than
"720 × 480p" or "720 × 480/576p. "
 You can select "(1920 × 1080i)HD
or "(1920 × 1080i)HD" only when you set
"HDMI RESOLUTION" in "HDMI SETUP"
to "1920 × 1080i. "
 The HDMI signal will stop momentarily
when:
 the system is loading or unloading a
DATA CD or DATA DVD.
 you connect or remove a USB device.

GB
: The system
"

Setting the audio

options
 "AUDIO SETUP"
Configure audio related settings.
The default setting is underlined.
AUDIO DRC (Dynamic Range
1)
Compression)
(DVD VIDEO only)
OFF: No compression of dynamic range.
STANDARD: Reproduces the sound
track with the kind of dynamic range that
the recording engineer intended. Useful
for watching movies at low volume late
at night.
MAX: Narrows the dynamic range fully.
TRACK SELECTION
(DVD VIDEO only)
Gives priority to the sound track which
contains the highest number of channels
when you play back a DVD VIDEO
on which multiple audio (PCM, DTS,
MPEG audio, or Dolby Digital) formats
are recorded.
OFF: No priority given.
AUTO : Priority given.
3)
2)