To specify the slide show speed
(JPEG image files only)
1
Press
DISPLAY repeatedly until the
Control Menu for JPEG image files
appears on the TV screen.
2
Press or repeatedly to select
(INTERVAL), then press ENTER.
The options for "INTERVAL" appear
on the TV screen.
3
Press or repeatedly to select the
desired transition interval.
The default setting is underlined.
NORMAL: sets to the standard
duration.
FAST: sets the duration shorter
than "NORMAL. "
SLOW 1: sets the duration longer
than "NORMAL. "
SLOW 2: sets the duration longer
than "SLOW 1. "
4
Press ENTER.
The selected setting takes effect.
Note
Some JPEG image files (especially progressive
JPEG image files or JPEG image files with
3,000,000 pixels or more) may take a longer
time to display than others, which may make
the transitions seem longer than that of the
option you selected.
To select a transition effect for image
files in the slide show
(JPEG image files only)
1
Press
DISPLAY repeatedly until the
Control Menu for JPEG image files
appears on the TV screen.
2
Press or repeatedly to select
(EFFECT), then press ENTER.
The options for "EFFECT" appear on
the TV screen.
3
Press or repeatedly to select the
desired setting.
The default setting is underlined.
MODE 1: The image sweeps in
from top to bottom of the screen.
MODE 2: The image sweeps in
from left to right of the screen.
MODE 3: The image stretches out
from the center of the screen.
MODE 4: The image randomly
cycles through the effects.
MODE 5: The next image slides
over the current image.
OFF: Turns off this function.
4
Press ENTER.
The selected setting takes effect.
Note
The "EFFECT" setting is not effective when
you set "JPEG RESOLUTION" in "HDMI
SETUP" to "(1920 × 1080i)HD
× 1080i)HD" (page 64).
" or "(1920
Continued
55
GB