Setting The Bluetooth Audio Codecs; Setting The Bluetooth Standby Mode - Sony SHAKE-X30 Operating Instructions Manual

Hide thumbs Also See for SHAKE-X30:
Table of Contents

Advertisement

Setting the BLUETOOTH
audio codecs
You can enable AAC, LDAC or SBC
codec reception from BLUETOOTH
device. AAC/LDAC can be selected
only when the BLUETOOTH device
supports AAC/LDAC.
1
Press OPTIONS.
2
Press / repeatedly to select
"BT CODEC", then press
3
Press / repeatedly to select
the setting, then press
"AUTO": Enable reception in AAC
• •
or LDAC codec format.
"SBC": Receive in SBC codec
• •
format.
To exit the options menu, press
OPTIONS.
Note
You can enjoy high quality sound if AAC
• •
or LDAC is selected. If you cannot listen
to AAC or LDAC sound from your device
or the sound is interrupted, select "SBC".
If you change this setting while the
• •
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
Hint
LDAC is an audio coding technology
developed by Sony that enables the
transmission of High-Resolution (Hi-Res)
Audio content, even over a BLUETOOTH
connection. Unlike other BLUETOOTH
compatible coding technologies
such as SBC, it operates without any
down-conversion of the Hi-Res Audio
content*
three times more data*
other technologies to be transmitted
over a BLUETOOTH wireless network
with unprecedented sound quality, by
means of efficient coding and optimized
.
packetization.
1
*
Excluding DSD format contents.
*
2
In comparison with SBC (Subband
.
Coding) when the bitrate of 990 kbps
(96/48 kHz) or 909 kbps (88.2/44.1 kHz)
is selected.
Setting the BLUETOOTH
standby mode
The BLUETOOTH standby mode
enables the system to turn on
automatically when you establish
a BLUETOOTH connection from a
BLUETOOTH device.
1
Press OPTIONS.
2
Press / repeatedly to select
"BT STBY", then press
3
Press / repeatedly to select
the setting, then press
"ON": The system turns on
• •
automatically even when the
system is in standby mode.
"OFF": Turns off this function.
• •
To exit the options menu, press
OPTIONS.
1
, and allows approximately
2
than those
.
.
29
US

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shake-x10

Table of Contents