Sony CMT-DH50R Operating Instructions Manual page 47

7
Press  (or  on the unit).
Program Play starts.
When the Program Play ends, you
can restart the same program by
pressing  (or  on the unit).
To change a programmed step:
Press  or  repeatedly to select the
programmed step number you want
to change. Then, press  and select
the desired track number.
To delete a programmed step:
Press  or  repeatedly to select the
programmed step number you want
to delete. Then, press CLEAR.
To delete all of the programmed
steps in the program list:
Press  to select "ALL CLEAR. " Then,
press ENTER.
To cancel Program Play
Press CLEAR or select "OFF" in Step 3.
To play back the same program again,
select "ON" in Step 3 and press ENTER.
Notes
 When Program Play is activated, the
"REPEAT" setting is automatically changed
to "ON" if the current setting is "DISC" or
"TRACK. "
 You cannot perform Program Play with
VIDEO CDs during PBC playback.
Tip
The Program Play is canceled and the program
list is cleared when
 you eject the disc.
 you turn off the system.
 you change the function.

Continued
7
GB