Table of Contents
Advertisement
Changing the format of the video
signal output from COMPONENT VIDEO
OUT jacks
Progressive is a method for displaying
TV images that reduces flickering and
sharpens the image. To use this method,
you need to connect to a TV that can
accept progressive signals.
You can output video signals from
COMPONENT VIDEO OUT jacks in
Interlace or Progressive format.
1
Press FUNCTION +/ (European
models only)/FUNCTION (except
for European models) or FUNCTION
+/ on the unit repeatedly to select
"DVD. "
2
Press
DISPLAY when playback is
stopped.
The Control Menu appears on the TV
screen.
3
Press or repeatedly to select
(SETUP), then press ENTER.
The options for "SETUP" appear.
4
Press or repeatedly to select
"CUSTOM, " then press ENTER.
The Setup Menu appears.
0
GB
5
Press or repeatedly to select
"VIDEO SETUP, " then press ENTER.
The options for "VIDEO SETUP"
appear.
6
Press or repeatedly to select
"PROGRESSIVE (COMPONENT OUT), "
then press ENTER.
The options for "PROGRESSIVE
(COMPONENT OUT)" appear.
7
Press or repeatedly to select the
desired setting, then press ENTER.
The default setting is underlined.
OFF: Outputs interlace signals.
Select this setting when:
your TV does not accept
progressive signals.
your TV is connected to jacks
other than the COMPONENT
VIDEO OUT jacks.
ON: Outputs progressive signals.
Select this setting when:
your TV accepts progressive
signals.
your TV is connected to the
COMPONENT VIDEO OUT
jacks.
When you select "ON, " the
confirmation display appears. Follow
the steps below.
Hide quick links:
Advertisement
Table of Contents
