Sony CMT-DH50R Operating Instructions Manual page 31

8
Press  or  repeatedly to select
"START, " then press ENTER.
The system outputs the progressive
signal for 5 seconds. Check that the
screen is displayed correctly.
9
Press  or  repeatedly to select
"YES. "
The system outputs the progressive
signal. When you select "NO, " the
system does not output the progressive
signal.
Note
There would be no image on your TV or the
image is not clear if your setting does not
match your TV or connection.
Choosing the VIDEO OUT
connection
Using the supplied video cord, connect
the VIDEO OUT jack to the video input
jack of your TV.

Continued
1
GB