Setting The Bluetooth Audio Codecs - Sony MHC-M20 Operating Instructions Manual

Table of Contents

Advertisement

Before pairing the next BLUETOOTH
device, be sure that the BLUETOOTH
function on the system is turned on
and the first BLUETOOTH device is
connected to the system.
To pair with the second or third
device
Repeat steps 1 to 6 of “Pairing this
system with a BLUETOOTH device”
(page 24).
To switch the playback source
Start playback on another
connected BLUETOOTH device while
the current device is playing music.
The system will output the sound
from the latest device.
Note
Operations may vary depending on
• •
the BLUETOOTH device. A BLUETOOTH
device may not be connected
depending on the combination of
the devices. For details, refer to the
operating instructions of the device.
If you try to connect the 4th BLUETOOTH
• •
device, the oldest playback device will
be disconnected.
Depending on the BLUETOOTH device,
• •
you may not be able to make three
BLUETOOTH connections at the same
time.
You cannot establish the multi-device
• •
connection when using the Wireless
Party Chain function.
To disconnect any BLUETOOTH
device from the multi-device
connection
Terminate the BLUETOOTH
connection from the BLUETOOTH
device which you want to
disconnect.
26
US
To disconnect all BLUETOOTH
devices from the multi-device
connection
Press BLUETOOTH on the unit.
“BT AUDIO” appears on the display.
Setting the BLUETOOTH
audio codecs
You can enable AAC, LDAC or SBC
codec reception from BLUETOOTH
device. AAC/LDAC can be selected
only when the BLUETOOTH device
supports AAC/LDAC.
1
Press OPTIONS.
2
Press / repeatedly to select
“BT CODEC”, then press
.
3
Press / repeatedly to select
the setting, then press
.
“AUTO”: Enable reception in AAC
• •
or LDAC codec format.
“SBC”: Receive in SBC codec
• •
format.
To exit the options menu, press
OPTIONS.
Note
You can enjoy high quality sound if AAC
• •
or LDAC is selected. If you cannot listen
to AAC or LDAC sound from your device
or the sound is interrupted, select “SBC”.
If you change this setting while the
• •
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.

Advertisement

Table of Contents
loading

Table of Contents