Sony CMT-DH50R Operating Instructions Manual page 99

Changing the input level of
the sound from connected
components
You can reduce the audio input level if
the sound from the TV/VIDEO AUDIO
IN jacks is distorted.
1
Press  to turn on the system.
2
Press DVD/USB MENU
(European models only) or
DVD/USB/TUNER MENU (except
for European models).
The current setting appears. (The
default setting is underlined.)
 ATT OFF: Normal audio input
level (attenuation is off)
 ATT ON: The audio input level is
lowered (attenuation is on).
3
To change the setting to the
other, press DVD/USB MENU
(European models only) or
DVD/USB/TUNER MENU (except
for European models) again
while "ATT OFF" or "ATT ON" is
displayed.
Enjoying the multi channel
sound with the optional
amplifier
1
Connect the digital optical cord.
See "Hooking up optional
components" (page 97).
2
Connect the speakers (not
supplied) to an optional
amplifier equipped with a
decoder.
For the speakers placement, refer to
the operating instructions supplied
with the connected amplifier.
3
Start playing a multi channel
source, such as a DVD VIDEO.
4
Select the desired audio format.
See "Changing the language/sound"
(page 38).

GB