Sony CMT-DH50R Operating Instructions Manual page 34

6
Press  or  repeatedly to select
the setting that matches your TV
type, then press ENTER.
If you have a : standard TV:
Select "4:3 LETTER BOX" or "4:3
PAN SCAN" (page 61).
If you have a wide‑screen TV or a
: standard TV with wide‑screen
mode:
Select "16:9" (page 61).
The Setup Display for the Control for
HDMI function appears.
7
Press  or  repeatedly to select
the setting.
 ON: The Control for HDMI
function (page 63) is set to on
(activated).
 OFF: The Control for HDMI
function is set to off (deactivated).
8
Press ENTER.
The setting is selected and "QUICK
SETUP is complete. " appears on the
TV screen.
The system is ready for playback.
If you want to change each setting
individually, see "Using the Setup
Menu" (page 59).

GB
To quit "QUICK" setup
Press DISPLAY.
To recall "QUICK" setup settings
1
Press DISPLAY when playback is
stopped.
The Control Menu appears on the TV
screen.
2
Press  or  repeatedly to select
(SETUP), then press ENTER.
3
Press  or  repeatedly to select
"QUICK, " then press ENTER.
Note
The guide message appears at the bottom of
the TV screen when you turn on the system
for the first time or after performing "RESET"
(page 114).