Table of Contents
Advertisement
Configuration
(Standalone)
Automatic Mode
(including Sound-
Active Mode)
Wash FX User Manual Rev. 1
Set the product in one of the standalone modes to control without a DMX controller.
·
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
To run the Wash™ FX in automatic mode, follow the instructions below:
1.
Press <MENU> to reach the menu's main level and Addr shows on the display.
2.
Use <UP> or <DOWN> until AUto shows on the display.
3.
Press <ENTER> and rUn will show on the display.
4.
Press <ENTER>.
NOTE: While in Automatic mode, the Wash™ FX will respond to sound.
The product will only respond to low frequencies of music (bass and drums).
Page 13 of 19
Advertisement
Table of Contents
