Description Of The Control Panel (Magicolor 1650En); List Of Control Panel Messages; Standard Status Messages; Caution Messages - Konica Minolta MagiColor 1600W Service Manual

Field Service Ver. 1.0 Nov. 2008

11. Description of the control panel (magicolor 1650EN)

11.1 List of control panel messages

11.1.1

Standard status messages

• Normal state messages are displayed on the upper line of the LCD.
Message
IDLE
PROCESSING
PRINTING
WARMING UP
CALIBRATING
ENERGY SAVER
CANCELLING JOB
INITIALIZING
magicolor 1650
STARTING PRINTER
PORT AUTH ACTIVE
11.1.2

Caution messages

Message
I/C END
I/C LOW
TRAY 2 IS EMPTY
TRAY 2 OPEN
VIDEO I/F ERROR
X INCORRECT
X MEMORY ERROR
X TONER LOW
11. Description of the control panel (magicolor 1650EN)
• Ready to print.
• Processing data.
• Printing.
• Warming up.
• Calibrating.
Whenever you replace a toner cartridge or reboot the printer after making
an environmental change, the printer automatically pauses to do an auto-
matic image density control (AIDC) cycle. This process is provided to
make reliable printer operation with optimum output quality possible.
• Energy saver mode.
• Canceling a job.
• The printer is being initialized.
• The printer is starting up.
• The IEEE802.1x port is being authorized.
• The imaging cartridge has reached the end of its life.
• The imaging cartridge is near the end of its life.
• Tray 2 is media empty.
• Tray 2 cassette is not installed or is not fully closed.
• A video interface error occurred in the printer.
• The specified color of toner cartridge is not a genuine KONICAMINOLTA
toner cartridge or not the correct type.
• A memory error occurred in the toner cartridge.
• The specified color of toner cartridge is low and should be replaced
within 200 pages at 5% coverage of Letter/A4 pages.
Description
Description
61