Duplex; Orientation - Konica Minolta MagiColor 1600W Service Manual

12. MENU (magicolor 1650EN)
F. TRAY CHAINING
Function • Allows a print cycle to continue without interruption when the current tray runs out of
media during the print cycle by automatically reselecting another tray, in which the
media of the same size and the same type is loaded.
Use • To allow media to be pulled from another tray when the media in the first tray runs
out.
Setting • The default setting is YES.
/procedure
NOTE
• This setting is available only when an optional Lower Feeder Unit is installed.
G. MAP
(1) MODE
Function • Selects whether or not the tray mapping function is used.
Use • To specify whether trays are mapped.
Setting • The default setting is ON.
/procedure
(2) LOGICAL TRAY 0-9
Function • Specifies whether jobs received from another manufacturer's printer driver are
printed using Tray 1 or Tray 2.
Use • To specify the media source for print jobs using another manufacturer's printer driver.
Setting • Only the default for LOGICAL TRAY 2 is PHYSICAL TRAY 2. PHYSICAL TRAY 1 is
/procedure the default for all trays other than LOGICAL TRAY 2.
12.3.2

DUPLEX

Function • Selects whether or not the duplex print function is used.
Use • To use the duplex print function.
OFF
SHORTEDGE : The pages will be printed on both sides of the media for short-
LONGEDGE
Setting • The default setting is OFF.
/procedure
NOTE
• This setting is available only when a Duplex Option is installed.
12.3.3

ORIENTATION

Function • Specifies the orientation of the media.
Use • To change the orientation of the media.
Setting • The default setting is PORTRAIT.
/procedure
68
"YES" / NO
"ON" / OFF
PHYSICAL TRAY 1 / PHYSICAL TRAY 2
: Duplex printing is not possible.
edge binding.
: The pages will be printed on both sides of the media for long-
edge binding.
"OFF" / SHORTEDGE / LONGEDGE
"PORTRAIT" / LANDSCAPE
Field Service Ver. 1.0 Nov. 2008