Clear Key; Rotate Toner Key - Konica Minolta MagiColor 1600W Service Manual

8. Description of the control panel (magicolor 1600W)
8.1.3

Clear key

• The Clear key can be used to cancel a print job. It also allows that specific print job to be
resumed after the error has been eliminated.
A. Cancelling a print job
• The currently processing print job can be canceled.
1. While data is being processed or printed (the green "Ready" indicator is blinking), hold
down the Clear key for more than 5 seconds.
2. Release the Clear key after both indicators light up. The current print job has now been
cancelled.
B. Continuing a print job after an error message
• The print job can be resumed after an error of any of the following types has been elimi-
nated:
• When there is no more media in the tray
• When media of a different format than that set in the printer driver was fed into the printer
1. Check that one of the above errors has occurred.
2. Perform the remedial action according to the error.
3. Press the Clear key (less than 5 seconds) to reinitiate media feeding.
4. The print job continues.
8.1.4

Rotate Toner key

• The Rotate Toner key allows you to switch the printer from normal operation mode to
change toner mode, eject all toner mode or print head cleanup mode.
The mode that the printer enters depends on how long the Rotate Toner key is held
down.
Mode
Change toner mode
Printer head cleanup mode
Eject all toner mode
52
Key operation
Press the Rotate Toner key
(Less than 5 seconds)
Press Rotate toner key for
between 5 and 10 seconds.
Press Rotate toner key for more
than 10 seconds.
Field Service Ver. 1.0 Nov. 2008
Indicators status
Magenta toner indicator flashes.
Replaceable toner indicator
flashes every time the key is
pressed.
All indicators blink once after the
key has been held down for 5
seconds.
All indicators flash once after the
key has been held down for 10
seconds.