Toner Out Action; Aidc; P/H Clean Up - Konica Minolta MagiColor 1600W Service Manual

12. MENU (magicolor 1650EN)
12.4.2

TONER OUT ACTION

Function • Specifies whether to stop or continue printing when a toner empty condition is
detected.
Use • To select to permit printing upon a toner empty condition.
Setting • The default setting is STOP.
/procedure
12.4.3

AIDC

A. REQUEST AIDC
Function • Executes image adjustments.
Use • To calibrate the engine when there are print image quality problems.
• To calibrate the engine when the transfer belt unit and transfer roller are replaced
with new ones.
Setting • The default setting is NO.
/procedure
• If YES is selected, image adjustments are performed.
B. MODE
Function • Applies the image adjustments
Use • If ON is selected, to apply the image adjustments.
• If OFF is selected, to not apply image adjustments.
Setting • The default setting is ON.
/procedure
12.4.4

P/H CLEAN UP

Function • To move the toner cartridge (Magenta) to the position where it can be removed so
that the printer head window can be cleaned.
Use • To clean the printer head window.
Setting • The default setting is YES.
/procedure
1. Select [MAIN MENU] - [QUALITY MENU] - [P/H CLEAN UP].
2. Open the front cover and remove the toner cartridge (M).
3. Close the front cover.
4. Open the top cover and remove the imaging cartridge.
5. Clean the print head window by wiping it with a soft, dry cloth.
70
Field Service Ver. 1.0 Nov. 2008
"STOP" / CONTINUE
YES / "NO"
"ON" / OFF
"YES" / NO