Re-Setting The Printer Whose Setup Was Canceled Halfway; Confirming The Version Of Windows Xp - Canon PIXMA IP4000R Setup Manual

Problem
Re-setting the printer
whose setup was
canceled halfway
Confirming the version
of Windows XP
82
Possible Cause and Measures
Restore the printer to the factory settings and set up the printer again. For
details, see "Printing and Initializing Network Settings" on page 67. For setup
procedures, see "Setting Up the Printer and the Computer" on page 16.
If you are using Windows XP, you may need to confirm your system version to
configure the network setting of your computer.
To check the version of Windows XP, follow these steps.
1
Right click My Computer from the Start menu and select Properties.
System Properties will be displayed.
2
Confirm that the General tab is displayed.
3
Confirm your Windows XP version under System.