The Target Access Point Is Not Detected, Or You Want To Specify Access Point Settings Manually - Canon PIXMA IP4000R Setup Manual

Problem
The target access point
is not detected, or you
want to specify access
point settings manually
74
Possible Cause and Measures
If the target access point is not detected or if you want to specify access point
settings manually, click Manual Setup in the Access Points dialog box.
If you connect to a network that is not protected with security measures, there is a risk of
disclosing data such as your personal information to a third party.
Set the target access point and click Connect.
Enter the settings for the target access point.
(1) SSID
Enter the SSID set to the access point.
SSID is also called ESS-ID. For details, refer to the manual of your access
point.
(2) Encryption Method
Select an encryption method from Do Not Use, Use WEP, or Use WPA.
When using a network key, communication is encrypted using the string you
specified. If the key has been set to the access point but not to the printer,
the setting window is displayed.
For details on WEP setting, refer to "WEP Details dialog box" on the
Network Guide. For details on WPA setting, refer to "Changing the WPA
Detailed Settings" on the Network Guide.
(3) Configuration
The detailed settings dialog box is displayed. WEP or the WPA key selected
in Encryption Method can be confirmed and changed.
(4) Connect
Connects to the specified access point.
(1)
(2)
(3)
(4)