The Set Printer Ip Address / Printer Ip Address Setup Dialog Box Is Displayed During Setup - Canon PIXMA IP4000R Setup Manual

Problem
The Set Printer IP
Address / Printer IP
Address Setup dialog
box is displayed during
setup
Possible Cause and Measures
The following dialog box is displayed if no printer was detected on the network.
Specify an IP address to detect the target printer.
(1) Get IP address automatically
Detects the printer automatically. If automatic printer detection fails, check
the network settings and your network connection.
(2) Use next IP address
Select this check box to manually specify the IP address for the printer to
detect.
IP Address/Subnet Mask/Default Gateway
Enter each value to specify a fixed IP address when Use next IP Address
is selected.
(3) Network Information
The Network Information dialog box is displayed to confirm network
settings when your access point or your printer cannot be detected
automatically during setup for use over the network. This button is enabled
when an access point was not detected or could not be connected.
(4) Connect
Searches for the printer with the specified settings.
(1) TCP/IP Setting
Select Get IP address automatically or Use next IP address. Select Get
IP address automatically to search for the target printer automatically. If it
fails, check the network settings and the network connection.
IP Address/Subnet Mask/Router
Enter each value to specify a fixed IP address when Use next IP address
is selected.
(2) Network Information
The Network Information dialog box is displayed to confirm network
settings when your access point or your printer cannot be detected
automatically during setup for use over the network. This button is enabled
when an access point was not detected or could not be connected.
(3) Connect
Searches for the printer with the specified settings.
(1)
(2)
(3)
(4)
(1)
(2)
(3)
77