The Printer Is Not Detected After The Network Environment Is Changed; The Set Printer Ip Address Screen Is Displayed - Canon PIXMA iX7000 Network Setup Manual

The Printer is Not Detected after the Network Environment is Changed

Check
Wait until the IP address is assigned to the computer. You may need to restart your
computer.
• Search for the printer again after confirming a valid IP address is assigned to the computer.
Glossary
• IP address
A numerical identification assigned to each computer or network device connected to a network.

Message is Displayed

The Set Printer IP Address Screen is Displayed

Check
A
Check 1
Make sure that you follow "Connection Checklist" on page 5, then click Connect (A).
Check 2
Unplug the network device (router, etc.) from the power outlet and plug it in, then click
Connect (A).
Check 3
When obtaining an IP address automatically, make sure that the DHCP function of the
network device (router, etc.) is active.
• For details on how to check settings of the network device, refer to the manual supplied with the
network device or contact its manufacturer.
Activate the DHCP function of the network device, then click Connect (A).
• For details on how to change settings of the network device, refer to the manual supplied with the
network device or contact its manufacturer.
Check 4
If the problem is not solved even after following Check 1 to 3, specify the IP address of
the printer.
• For details on how to specify the IP address, refer to "Specifying the Printer's IP Address" on page 3.
Glossary
• DHCP function
A function that automatically assigns required information (IP address, etc.) to computers connected to
the Internet.
• IP address
A numerical identification assigned to each computer or network device connected to a network.
during Software Installation
A