The Printer Network Setup Dialog Box Is Displayed During Setup; The Enter Password / Password Input Dialog Box Is Displayed During Setup; The You Have Connected The Printer To An Unsecured Wireless Network Is Displayed During Setup - Canon PIXMA iP5200R Setup Manual

Problem
The Printer Network
Setup dialog box is
displayed during setup
The Enter Password /
Password Input dialog
box is displayed during
setup
The You have
connected the printer
to an unsecured
wireless network is
displayed during setup
60
Possible Cause and Measures
The Printer Network Setup dialog box is displayed in the following cases.
- when you are re-setting a printer whose setup was canceled halfway
- when you changed the network settings
- when you are already using a printer over a wireless or wired LAN
If you canceled setup or changed the network settings, perform network setup
again. When you intend to use the printer connected to the network with the
current settings, do not change the network settings.
Change printer settings
The printer network settings will be changed to enable communication under
the current network settings.
Do not change printer settings
Continues computer setup with the settings specified to the printer.
Select this when you are not currently connected to a network but want to set
up the computer with the settings specified to the printer.
After setup, confirm that the printer and the computer (or the access point, when using
wireless LAN) can communicate with each other. If not, perform network setup again.
The following dialog box is displayed if an administrator password is set to the
printer which has already been set up.
Admin Password
Enter the administrator password you have set. The administrator password
consists of alphanumeric characters and is no longer than 32 characters. The
password is case sensitive.
For security, your entry will be displayed by "*" (asterisks) for Windows and "•"
(bullets) for Macintosh.
Security is not configured on the access point.
The printer can still be used, so continue the setup procedure to complete it.
If you connect to a network that is not protected with security measures, there is a risk of
disclosing data such as your personal information to a third party.