Download Print this page

Cisco CDE100 Hardware Installation Manual page 46

Content delivery engine
Hide thumbs Also See for CDE100:

Advertisement

CDE-200
CDE-200
Dimensions (H x W x D)
Weight
Content Storage Capacity
Interface
Memory
Processor
Controllers
Operating System
Operating System Disk
Cable length
Power
Fan Assembly
Operating Temperature
Humidity
Short-term Humidity
Altitude
Management
Data Rate
Ports
Input Cables
Cisco Content Delivery Engine Hardware Installation Guide
A-2
3.50 (2RU) × 17.50 × 28.50 in. (8.90 × 44.45 × 72.39 cm)
Chassis fully configured (all slots filled): 53.5 lb. (24.27 kg)
12 Serial-ATA 500-Gigabyte hard drives
6 Gigabit Ethernet interfaces
8 Gigabytes RAM
Two 64bit Dual-Core Intel Xeon @ 3.20 GHz (or above), 800 MHz FSB
SuperMicro SAT2-MV8
Linux kernel 2.6.10 (contained on the Compact Flash device)
Two 60-Gigabit small form-factor SATA hard drives
Twisted Pair: Maximum of 330 ft (100 m) using Category 5E or higher,
4 pair
902 ft (275 m) maximum (62.5/125 mm)
500 W (110 and 220 VAC or –48 VDC) redundant
Redundant with operation alarm monitored by system
32 to 122°F (0 to 50°C)
5 to 95% noncondensing
5 to 98% (96 hours)
–197 to 13120 ft (–60 to 4000 m)
2 Gbps maximum
Console port: DB-9 RS-232
10/100/1000 Mbps Ethernet interface: RJ-45 (management)
For console port: DB-9 female serial cable
For Ethernet interface: RJ-45 category 5E or higher cable
Appendix A
Technical Specifications
OL-13478-01

Advertisement

loading

This manual is also suitable for:

Cde200