Advertisement
Chapter 3
Installing the Software and Initially Configuring a CDE
Figure 3-16
Step 9
Use the on-screen instructions to move the elements into the following order:
1.
CD-ROM drive (first boot device)
2.
Flash device (first hard drive)
Removable devices
3.
Network device
4.
Caution
The devices must be in the correct order for the installation to be successful.
Step 10
Press Esc to return to the Main menu. To configure IDE, set the IDE Channel 0 Master option to None
and the IDE Channel 1 Master option to [128] (this is compact flash card) (see
Figure 3-17
Note
OL-13478-01
Hard Disk Drives Screen
Main Menu
On the CDE-200, the Primary IDE Master is connected to 80 GB hard drive (not used), and the
Secondary IDE Master is connected to 128 MB compact flash.
Cisco Content Delivery Engine Hardware Installation Guide
Running the BIOS Setup Utility
Figure
3-17).
3-11
Advertisement
