Cisco CDE100 Hardware Installation Manual page 23

Chapter 2 Installing the CDEs
To access the disk drives on a CDE-200 only, you must first remove the front cover by turning the keys
Step 2
on the left and right sides of the cover and removing it from the CDE-200 (see
Figure 2-5
Unlock the latch by pressing the safety lock button on the front of the latch (see
Step 3
Unlatch the disk drive tray from the locking clip and swing open the main latch (see
Step 4
Step 5 Carefully pull the disk drive out of its drive tray slot.
Step 6 Insert a new disk drive into the drive tray slot and make sure it is properly seated.
Step 7 Close the latch completely and lock it in place by pressing the safety lock button.
Figure 2-6
OL-13478-01
CDE-200 Front Cover
1 2
Chassis Drive Tray Installation and Removal
Cisco Content Delivery Engine Hardware Installation Guide
Installing the CDEs
Figure 2-5).
Figure 2-6).
Figure 2-6).
2-9