Cisco CDE100 Hardware Installation Manual page 34

Running the BIOS Setup Utility
Figure 3-14
Choose Boot Features and press Enter. The Boot Features screen appears (see
Step 7
Figure 3-15
Set the QuickBoot Mode option to Enabled.
a.
Set the Quiet Boot option to Disabled.
b.
Set the After Power Failure option to Power On.
c.
Use the Down arrow key to expand +Hard Drive and expose its subelements (see
Step 8
Cisco Content Delivery Engine Hardware Installation Guide
3-10
Advanced Menu
Boot Features Screen
Chapter 3 Installing the Software and Initially Configuring a CDE
Figure 3-15).
Figure 3-16).
OL-13478-01