Cisco CDE100 Hardware Installation Manual page 11

Chapter 1 Overview of Content Delivery Engines
Figure 1-6
1
2
LED Indicators
Figure 1-7
Figure 1-7
No. LED
1
2
3
4
5
6
OL-13478-01
CDE-200 Front Panel Control Buttons
1 2
1 2
Power Powers up the device. You may need to use a pen or the end of a straightened
paper clip to press the button.
Reset Resets the device and runs the power-on self-test (POST). You may need to
use a pen or the end of a straightened paper clip to press the button.
Note
shows the location of the CDE-100 front panel LEDs, and describes their functions.
CDE-100 Front Panel LEDs
Color
Power Blue
Hard disk drive activity Blue
Ethernet port 1 Blue
Ethernet port 2 Blue
CD-ROM drive activity Blue
Reset Blue
This is a hardware reset button and does not restore the device to the
factory default software settings.
2 4 1
3 6
State Description
On Power is flowing to the device.
On Associated hard disk drive is in use.
On Port is connected.
On Port is connected.
On CD-ROM drive is in use.
On Reset is in progress.
Cisco Content Delivery Engine Hardware Installation Guide
Hardware Features
5
1-3