Gear Motor Oil; Coolant; Cylinder Storage Oil - Haulotte HT23RTJ O Maintenance Book

HT23RTJ O - HT23RTJ O SW - HT67RTJ O - HT23RTJ PRO - HT23RTJ PRO SW - HT67RTJ PRO
C
- Familiarization
4.4 - G
EAR MOTOR OIL
The recommended oil is EP type, the characteristics of which comply with standards MIL-L-2105 and
API GL5.
N.B.-:-R
EFER TO
Normal operating condition
Harsh operating condition
4.5 - C
OOLANT
Always use a 50/50 blend of coolant and clean soft water.
The coolant is available in different types. For this engine, use the ethylene glycol type (EG).
The procedure for the blend of water and antifreeze differs according to the manufacture of the
antifreeze. Refer to standard SAEJ1034 and more precisely SAE J814c.
N.B.-:-R
EFER TO
Antifreeze volume (%)
50
Never add a different brand of coolant. The different brands may have different additive components, and
the engine may fail to perform as specified. When the liquid is mixed, do not use any radiator cleaning
agent. If the liquid is mixed with a cleaning agent, an emulsion may form and the engine components may
be damaged.
4.6 - C
YLINDER STORAGE OIL
If a cylinder is not used, the surface of the cylinder rod may be exposed to a corrosive environment
(Example : When new equipment is stored before shipping. ).
1 time per month, apply oil diluted in a solvent (Recommendations : UNIL OPAL PROTECT SHX 12).
Procedure :
• Wash the machine completely to remove any trace of harsh environmental pollution. Clean the
cylinder rods, which are sensitive to corrosion, using clean water.
• Perform a dynamic test. For each cylinder perform a movement from stop to stop ( 3 times each
movement).
• Dry the cylinder rods.
• Grease the cylinder rods with protective oil (See recommendations)
• Verify absence of any oil leaks.
N.B.-:-R
EFER TO
66 4001055250
C
ONSOMMABLES
Mineral
SAE 80W/90
SAE 85W/140
C
ONSOMMABLES
Freezing point
° C ° F
- 37 - 34
C
ONSOMMABLES
E 10.21
Synthetic
SAE 75W/90
SAE 80W/140 - SAE 75W/140
Boiling point
° C ° F
108 226
USA / GB