About Led - Panasonic KV-S1058Y Operating Manual

5.1 About LED

The status of the scanner is displayed by the LED (Red) ( ) and the LED (Green) ( ), as shown in the
table below:
LED (Red)
OFF
OFF
OFF
OFF
OFF
OFF
Blinking (Slow)
ON
If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will turn
*1
off automatically. Press the power button ( ) of the scanner to turn it on. You can enable/disable the power off feature, and
change the time until the scanner turns off. See "5.3 Menu screen" (page 23).
If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press
*2
any button (except the power button) on the scanner's operation panel to return to ready mode. The time until the scanner enters
sleep mode can be changed. See "5.3 Menu screen" (page 23).
For details about the notification, check the LCD or User Utility.
*3
For details about the error, refer to "10.4 Error Code and Error Messages" (page 81).
*4
LED (Green)
OFF
ON
Blinking (Fast)
Blinking (Fast, 2 times consecutively)
Blinking (Fast, 3 times consecutively)
Blinking (Slow)
ON
OFF
Status
Power OFF
*1
Ready mode or Scanning
Warming up
Double Feed Skip mode
Dog-ear detection skip mode
Sleep mode or Cleaning mode
*2
Notification mode
*3
Error
*4
5.1 About LED
21