Install Software; Turn-On The Scanner; About Led - Panasonic KV-S1025C Installation Manuals

8

Install Software

All drivers (Device Driver/TWAIN/ISIS), applications,
utilities, and manuals can be installed at the same
time using the Complete Installation.
(1) Insert the CD-ROM into your CD/DVD
drive on your computer.
(2) If you have a feature called 'Autorun'
activated, this will start the installation
process automatically.
Note:
• If the AutoPlay dialog box is displayed in
Windows Vista
• If the program does not automatically start,
click [Start], click [Run...], click [Browse...],
and select the CD/DVD drive containing the
installation software, double-click on
'CDRun.exe' in the root directory to
manually start the installation routine, then
click [OK].
(3) Select your scanner.
(4) Select the [Complete] from the
[Installation] list.
(5) Follow the instructions on the screen.
If the screen 'Windows
the publisher of this driver software'
appears, continue with the installation
by selecting 'Install this driver software
anyway'.
* Microsoft Windows Vista
1 ®
* Microsoft Windows
2 ®
(hereafter Windows)
* , select "CDRun.exe".
TM 1
can't verify
*
® 2
operating system
TM
operating system
®
Setting up the Scanner
9

Turn-on the scanner

(1) Turn on the power of the scanner.
• Push the power switch.
• The LED (Green) will blink for about 30
seconds, and then it will become steady.
Power switch ( )
(2) Follow the instructions of the hardware
wizard to complete the installation.
(3) Install scanner applications when
necessary.
'
Even if the screen Digital Signature was not found
' or '
for this driver has not passed Windows Logo
' appears, continue with the installation.
testing···

About LED

The status of the scanner can be established by the
condition of the two LED indicators shown in the
table below:
LED (Green)
LED (Red)
LED (Green) LED (Red)
ON OFF
Blink (Slow) OFF
ON Blink (Slow) Caution
Blink (Slow) Blink (Slow) Caution/Sleep
ON ON
Blink (Fast) OFF
It will take about 30 seconds to initailize the scanner
*
under the following conditions.
• Just after turning the power on
• After about 2 hours on sleep mode
• Over about 5 seconds with the ADF door open
Ready
Error
Start / Stop
Status
Ready
Sleep
Error
Warming up
*
7