About Led - Panasonic KV-S7097 Operating Manual

■ About LED

The status of the scanner is displayed by the LED (Red) (
below:
1
LED (Red)
OFF OFF
OFF Blinking (Fast)
OFF ON
Blinking (Slow) ON
OFF Blinking (Slow)
Blinking (Slow) Blinking (Slow)
ON OFF
OFF Blinking (Fast, 2 times consecutively)
OFF Blinking (Fast, 3 times consecutively)
*1
If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner
will be turned off automatically. Press the power button of the scanner to turn it on. You can enable/disable the power off
feature, and change the time until the scanner turns off in User Utility.
*2
If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy.
Press any button (except the power button) on the scanner's operation panel to return to ready mode. The time until the
scanner enters sleep mode can be changed in User Utility.
*3
For details about the error, check in User Utility.
1
) and the LED (Green) (
2
LED (Green)
Component Identification
2
), as shown in the table
Status
*1
Power OFF
Warming up
Ready mode or Scanning
Notification mode
*2
Sleep mode or Cleaning mode
*2
Sleep mode and Notification mode
*3
Error
Double feed skip mode
Dog-ear Detection Skip mode
11