Using Push Scan; Usb Mode - Panasonic KV-S1058Y Operating Manual

6.4 Using Push Scan

6.4 Using Push Scan
This scanner has a push scan function to start scanning. There are 3 push scan modes. In ready mode, you
can select the push scan mode by pressing the Skip/Menu button (

6.4.1 USB mode

Scanned data is pushed to the computer connected via USB.
•
Both the scanner and Image Capture Plus process the image.
•
A job and [Scan Button Settings] should be registered in Image Capture Plus in advance.
•
For details about registration, refer to the Image Capture Plus help.
•
You can select [Touch Free Scanning] or [Single Touch Scanning] using Scan Button Setting Tool. Double
click the ( ) icon in the notification area of the task bar to open Scan Button Setting Tool. (In Windows
8, open Scan Button Setting Tool on the desktop screen.)
1.
Press the Skip/Menu button (
2.
Use or of the cursor button to select a group.
3.
Use or of the cursor button to select a job.
4.
Place the documents on the feed tray.
•
If no application starts even though you specified one in Scan Button Setting Tool, see "10.3 Check
the Event Settings for Push Scan" (page 80).
[Touch Free Scanning]:
Scanning will start when documents are placed on the feed tray.
[Single Touch Scanning]:
Press the Start/Stop button (
50
) to select USB mode.
) to start scanning.
).