About Led - Panasonic KV-S5078Y Operating Manual

5.1 About LED

The status of the scanner is displayed by the Error LED (Red) and the Ready LED (Green) as shown in the
table below.
Error LED (Red)
OFF
OFF
OFF
OFF
OFF
OFF
Blinking (Slow)
Blinking (Slow)
ON
If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will turn
*1
off automatically. Press the power button ( ) of the scanner to turn it on. You can enable/disable the power off feature, and
change the time until the scanner turns off. See "5.2.1 Menu Screen" (page 35).
If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press
*2
any button (except the power button) on the scanner's operation panel to return to ready mode. The time until the scanner enters
sleep mode can be changed. Refer to "5.2.1 Menu Screen" (page 35).
For details about the notification, check the LCD or User Utility.
*3
For details about the network error, refer to "12.10 Error Codes and Error Messages (KV-S5078Y)" (page 132).
*4
For details about the error, refer to "12.10 Error Codes and Error Messages (KV-S5078Y)" (page 132).
*5
KV-S5058
Small/Thin paper mode LED (Green)
OFF
ON
Ready LED (Green)
OFF
ON
Blinking (Fast)
Blinking (Fast, 2 times consecutively)
Blinking (Fast, 3 times consecutively)
Blinking (Slow)
ON
OFF
OFF
Power OFF
Ready mode
Scanning
Warming up
Double Feed Skip mode
Dog-ear detection skip mode
Sleep mode
Cleaning mode
During shading
Downloading firmware
Notification mode
Network Error
Error
*5
Status
Small/Thin paper mode is disabled.
Small/Thin paper mode is enabled.
5.1 About LED
Status
*1
*2
*3
*4
31