Table of Contents
Advertisement
6 Operation Panel
6.1 About LED
The status of the scanner is displayed by the LED (Green) as shown in the table below:
LED (Green)
OFF
ON
Blinking (Slow)
Blinking (Fast)
Blinking (Fast, 2 times consecutively)
Blinking (Fast, 3 times consecutively)
If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will turn
*1
off automatically. Press the power button ( ) of the scanner to turn it on. You can enable/disable the power off feature, and
change the time until the scanner turns off. See "Function Setting" (page 38).
For details about the error, refer to "15.9 Error Codes and Error Messages" (page 134).
*2
For details about the notification, check the LCD or User Utility.
*3
If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press
*4
the Start/Stop button (
mode can be changed. See "Function Setting" (page 38).
Power OFF
Error
Ready mode or Scanning
Notification mode
Sleep mode
Warming up
Double Feed Skip mode
Dog-ear Detection Skip mode
) on the scanner's operation panel to return to ready mode. The time until the scanner enters sleep
Status
*1
*2
*3
or Cleaning mode
*4
6 Operation Panel
33
Advertisement
Table of Contents
