7 Configuration Web
Network settings for this unit can be configured using the web browser that was launched from Network
Scanner Select Tool.
Note
Some settings can also be configured using the LCD on the unit. For details, refer to "5.3 Menu screen"
(page 23).
7.1 Launch Configuration Web
1.
Start Network Scanner Select Tool.
2.
Select the scanner.
3.
Click [Configuration Web].
•
The web browser will launch.
Notice
•
Use the password setting screen to set a password before using the web browser.
•
Please note that User Name is [root].
7.2 Configuration items
The following items can be configured / confirmed.
Information
Function
Scan
Network
Displays the following details about the scanner.
•
Status of the scanner
•
Information of the scanner
•
Information of the counters for maintenance
Set the sleep mode, maintenance timing, etc.
Scan Settings
•
Register the scanning conditions for Preset Scan.
•
You can register up to 20 settings of conditions.
Register combinations of the following settings for Preset Scan.
•
Scanning conditions
•
The destination (FTP server, shared folder (SMB) or e-mail address)
You can register up to 30 settings.
When you use e-mail, please input the e-mail address directly.
Scan Log
Configure network settings.
7 Configuration Web
53