Home Screen; Recording Screen - Tascam DR-22WL Reference Manual

Home Screen

1 Playback file type message
Format type, sampling rate, bit rate, stereo/mono setting of
the playback file are shown.
2 Plug-in power on/off message
The plug-in power status (on/off ) is displayed in icon view.
(See "Recording with an external microphone (MIC IN)" on
page 14.)
Icon On/off status
Blank Plug-in power function off
Plug-in power function on
3 Monitor output message
: output from built-in speaker
: output from headphone
4 Power supply status message
When power is supplied from the batteries, the current
battery level is displayed in bars (
When the battery level is low, the
will be switched off (standy mode).
The will be displayed when using either the dedicated
AC adapter (TASCAM PS-P520E; sold separately) or the USB
bus power.
NOTE
When attempting recording or other operations that
consume large amount of power, a warning message of
Battery Low may pop-up.
5 Level meter
Displays the level of the playback sound.
6 Recorder status message
The recording status is indicated in the following icons:
Indicator Meaning
Stop
8
Pause
9
Playback
7
Fast forward
,
Rewind
m
Skip forward to the beginning of the next file
/
Skip backward to the beginning of either the
.
current or preceding file
7 File name
The name or tag information of the file currently in play is
displayed.
The ID3 tag information is displayed instead when included
in the MP3 file.
2 – Names and functions of parts
, , ).
will flash and the power
NOTE
ID3 tag information contains titles and artist names, which
can be stored in MP3 files.
8 Function buttons status message
Below icons are displayed while in stop or playback mode.
Icon Function
Display browse screen
Mark function (set/clear)
Delete file
9 Peak decibel (dB) message
Displays the maximum playback level in decibel reading per
set amount of time.
0 Elapsed time message
Displays the elapsed time (hours: minutes: seconds) of the
current file.
q Remaining time message
Displays the remaining time (hours: minutes: seconds) of the
current file.

Recording Screen

The below recording screen is displayed in recording or
recording standby mode.
1 Recording mode message
Displays the format, sampling rate, and stereo/mono of the
recording file. (See "Recording format settings (FORMAT/
SAMPLE/TYPE)" on page 16.)
2 Low-cut filter on/off status message
Displays the low-cut filter on/off status.
The message is highlighted when the low-cut filter is set at
40Hz / 80Hz / 120Hz / 220Hz.
Blank: low-cut filter is off
: low-cut filter is on
3 Limiter function on/off message
Displays the limiter function on/off status. (See "Setting the
Low Cut Filter" on page 18.)
Blank: limiter function is off
: limiter function is on
4 Peak reduction function on/off status message
Displays the peak reduction on/off status. (See "Using the
level control function" on page 18.)
Blank: peak reduction function is off
: peak reduction function is on
7
TASCAM DR-22WL