Inserting And Removing Microsd Cards; Inserting The Sd Card; Removing The Card; Setup The Microsd Card For Use - Tascam DR-22WL Reference Manual

3 – Preparation
4. Press the F4
button to display the DATE/TIME screen.
5. Press the F4
button to move the cursor (highlighted
area), and use the F2 and F3
settings.
6. Press the F1 button to finalize the settings. The screen
will return to the SETUP page.
NOTE
The file name will include the set date/time. (See "Setting
the file name type" on page 43.)
CAUTION
Without the use of the batteries, the dedicated AC adapter
(TASCAM PS-P520E; sold separately) or USB bus power, the
date and time setting can be made only for a few minutes.
When using batteries, we recommend to replace them
before they are completely drained.

Inserting and removing microSD cards

Inserting the SD card

NOTE
A microSD card is already installed at the time of purchase.
You can immediately start recording and playing tracks
without the need to remove and insert the microSD card.
1. Open the microSD card slot cover on the right side panel.
2. Insert the microSD Card into the slot (as illustrated below)
until it clicks into place.
12
TASCAM DR-22WL
buttons to change

Removing the card

1. Open the microSD card slot cover.
2. Gently press and release the microSD card; the card should
pop out.
CAUTION
• Do not remove the microSD card while the unit is accessing
data for recording, playback, etc.
• Do not remove the microSD card from the unit when
connected via USB cable to a computer.
• The DR-22WL is compatible with microSD/microSDHC/
microSDXC standards.
• A list of SD cards that have been confirmed for use with this
unit can be found on our web site. Please access to a product
page of this product from the TEAC Global Site (http://
teac-global.com) to find the list or contact the TASCAM
customer support service.

Setup the microSD card for use

To use a microSD card, it must be formatted first by the
DR-22WL.
1. Confirm that a microSD card is inserted and turn the power
on.
2. The following message appears when a new card or a card
formatted by another device is inserted into the unit.
micro SD/SDHC card
micro SDXC card
3. Press the F4 button to start formatting.
CAUTION
Formatting will delete all data from the card.
4. When formatting is complete, it will return to the home
screen. You may format the card whenever required.