Changing The Playback Speed (Vsa); Changing Keys; Adding Marks Manually During Playback; Clearing Specified Marks - Tascam DR-22WL Reference Manual

Changing the playback speed (VSA)

The DR-22WL has a built-in VSA (Variable Speed Audition)
function to change the playback speed without changing its
pitch.
CAUTION
The VSA function will not work when you select a file
recorded with a sampling rate of 96kHz.
1. In PRACTICE screen, press the F3
(highlight) the SPEED item, and press the F4
enable the playback speed change option.
2. Use the F2 and the F3
playback speed value.
Options: x0.5 - x2.0 (per x0.1) (default: x1.0)
3. Press the F4
button to finalize the setting and return to
the item selection mode.
4. Press the PLAY button for playback.
NOTE
Press the F1 button to simultaneously turn on/off the
speed change and key change (KEY, FINE) settings Settings
will be stored.

Changing keys

The DR-22WL can change the playback key (pitch) with its key
control function.
The key control function offers KEY and FINE TUNE modes. The
KEY mode can adjust in ± 6 half-tone, and the FINE TUNE mode
can adjust in ±50 cents.
1. In the PRACTICE screen, press the F3
(highlight) either the KEY or FINE items, then press the F4
button to enable the key change setting.
Pop-up display of the KEY item
Pop-up display of the FINE item
2. Use the F2 and the F3
value.
Options:
When KEY is selected : ¢6 - £6 (per half-tone) (default: 0)
When FINE is selected : −50 - +50 (per cent) (default: 0)
button to select
button to
buttons to change the
button to select
buttons to change the key
3. Press the F4 button to finalize the setting and return to
the item selection mode.
4. Press the PLAY button for playback.
NOTE
Press the F1 button to simultaneously turn on/off the
speed change and key change (KEY, FINE) settings Settings
will be stored.
Adding marks manually during
playback
Press the F2 button during playback to add a mark at that
position.
The number of the added mark will be shown on a pull-up at the
bottom of the display.

Clearing specified marks

Pause at the position of a mark. Then, press the F2
clear that mark.

Moving to the cue mark position

In stop or playback mode, you can move to cue marks created in
the selected file.
You can use this function to go to the beginning of a song,
similar to an index.
Multiple types of marks can be added to files (MARK, LEVEL, TIME
and PEAK). With this function, you can set what type of mark to
use when moving between them.
/MENU/8 button to open the menu screen.
1. Press the
2. Press the F1
button to open the TOOL page.
3. Use the F2 and F3
buttons to select MARK SKIP MODE,
and press the F4
button.
The MARK SKIP MODE options will be shown.
6 – Playback
button to
29
TASCAM DR-22WL