11 - Messages - Tascam DR-22WL Reference Manual

11 – Messages
The following is a list of the pop-up messages.
The DR-22WL displays these pop-up messages according to the
situation; refer to this list to learn more details and/or solutions.
Message Details and solutions
The batteries are empty.
Battery Empty
Replace the batteries.
The selected division point is not
appropriate for DIVIDE action (the
Can't Divide
beginning and end of the track).
The card cannot be recognized.
Card Error
Replace the card.
The card has no empty space.
Erase unnecessary files or transfer
Card Full
them to a computer.
Current File
MP3 files cannot be divided.
MP3
The name of the DIVIDE file to be
created is identical to the name of
the file that already exists in the same
folder. The DIVIDE function adds "a" or
Dup File Name
"b" to the end of the file name. Before
using the DIVIDE function, connect the
DR-22WL to a computer and edit the
file name.
The total number of folders and files
exceeded the limit (5000).
File Full
Delete unnecessary folders and files or
move them to a computer.
More than 200 characters has been
added to the file name due to the
DIVIDE function. The DIVIDE function
adds "a" or "b" to the end of the file
File Name ERR
name. Before choosing the DIVIDE
function, connect the unit to a
computer and edit the file name to less
than 198 characters.
The file cannot be found or damaged.
File Not Found
Check the target file.
System files required to operate the
DR-22WL is missing. To create system
File Not Found
files, press the PLAY button while this
Make Sys File
message is displayed.
The file is read-only and cannot be
File Protected
deleted.
The microSD card is not formatted
properly or damaged. This message
also appears when a computer under
USB connection formatted the card, or
when an unformatted card is inserted
to the unit.
Format Error
Cards must be formatted with the
Format CARD
DR-22WL. Insert a different card,
or press the F4
formatting.
Formatting will delete all data on the
microSD card.
The card may not work properly.
Invalid Card
Replace the card.
Change Card
The system file required to operate this
unit is invalid. To create new system
Invalid SysFile
files, press the F4
Make Sys File
message is displayed.
The IN (start) and OUT (end) points are
too close. Re-set by spacing at least
I/O Too Short
one second in between.
44
TASCAM DR-22WL
Message
Low battery
Wi-Fi OFF
Max File Size
MBR Error
Init CARD
No MUSIC File
No Card
Non-Supported
Write Timeout
Can't Save Data
Device Error
File Error
Not Continued
Player Error
Writing Failed
Sys Rom Err
System Err XX
(XX is a number.)
button to start
button while this
Details and solutions
The battery charge is low, so Wi-Fi
cannot be used. Replace the batteries
with new ones.
The file is larger than the designated
size, or the recording time has
exceeded 24 hours when the total
number of folders and files was already
at the limit (5000)
The card is not formatted properly
or damaged. Insert a different card,
or press the F4
button to start
formatting.
Formatting will delete all data on the
microSD card.
There is no playback file.
A SD card is not set. Insert a recordable
SD card.
The file type is not supported. Please
refer to the 8 – Connecting with a
computer 34 for compatible file
types.
Writing to the card timed out. Back up
files to a computer and format the card.
Restart the unit when this error
message appears.
If the power cannot be turned off,
remove the batteries, disconnect the
AC adapter (TASCAM PS-P520E; sold
separately), or disconnect the USB
cable when in bus power supply.
If the error message continues to
appear frequently, please contact the
store where you purchased this unit or
a TASCAM customer support service.