Turning The Power On And Off (Standby Mode); Starting Up The Unit; Shutting Down (Standby Mode); Resume Function - Tascam DR-22WL Reference Manual

Turning the power on and off (standby
mode)
CAUTION
• When you turn the power switch off while supplying power
from the dedicated AC adapter (TASCAM PS-P520E; sold
separately) or the USB bus power connected to a computer,
the unit will go to a standby mode.
• Before turning the power switch on and off, turn the volume
down for the sound system connected to the unit.
• Do not wear headphones when turning the power switch
on and off (standby mode); the noise may cause damage to
your ears and/or headphones.

Starting up the unit

In power off mode, slide and hold the HOLD/
(located at left-side of the panel) toward the
release the switch when the TASCAM DR-22WL (start-up screen)
appears.
The DR-22WL starts up and the home screen is displayed.
Start-up screen
CAUTION
When turn the power on for the first time (or when the
built-in clock is reset due to no battery power), the DATE/
TIME screen will appear before the home screen to set date/
time. (See "Setting the date/time" on page 11.)

Shutting down (standby mode)

In power on mode, slide and hold the HOLD/
(located at left-side of the panel) toward the
release the switch when the TASCAM DR-22WL shutting down...
appears.
The power turns off when the shut-down process is completed.
CAUTION
Always use the HOLD/
In power on mode, all recorded data and settings will be
lost if you remove the batteries, disconnect the power
cable of the dedicated AC adapter (TASCAM PS-P520E; sold
separately), or plug-off the USB cable for USB bus power.
Any lost data and/or settings cannot be restored.
switch
direction, and
Home screen
switch
direction, and
switch to turn the power off.
3 – Preparation

Resume function

The DR-22WL is equipped with a resume function to locate the
previous position (or time) when the power was turned off.
Turn the power on and press the PLAY button to playback from
the previous file position (time) when the power was turned off.
NOTE
The position is recorded in the microSD card. The resume
function does not work if the microSD card is replaced or
formatted.

Selecting the language

You can change the language shown on the display. The first
time you turn the unit on after purchasing it, the LANGUAGE
screen will open. You can set the language used on this screen.
You can also change this setting with the SYSTEM screen
LANGUAGE item.
1. Use both the F2 and F3
and select the language.
Options
use English
English:
use Japanese
日本語:
use French
Français:
use Spanish
Español:
Deutsch: use German
use Italian
Italiano:
Русский : use Russian
2. After making the selection, press the F4
confirm it.
If you accidentally select the wrong
language
Slide the HOLD/
switch to turn the power off. Then, slide
the HOLD/ switch while pressing and holding the MENU
button to turn the unit on again.
The language selection menu where you can set the language
appears.

Setting the date/time

The DR-22WL uses its internal clock to record the date and time
to the recorded files.
1. Press the /MENU/8 button to display the menu screen.
2. Press the F1
button to display the SETUP page.
3. Use both the F2 and F3
the DATE/TIME item parameters.
buttons to move the cursor
button to
buttons to select (highlight)
11
TASCAM DR-22WL