Setting The File Name Type - Tascam DR-22WL Reference Manual

4. Press the F3
button to format the microSD card.
Press the F2
button to cancel the process.
NOTE
• Using the ERASE formatting option might restore an SD card
that has decreased writing performance due to repeated
use.
• ERASE formatting checks for memory errors as it formats, so
it takes more time compared to QUICK formatting.
CAUTION
When formatting the microSD card, make sure that the
DR-22WL is connected to either the dedicated AC adapter
(TASCAM PS-P520E; sold separately) or the USB bus power
from a computer, or operating on fully-charged batteries.
Formatting may not complete successfully if the battery
runs out.

Setting the file name type

The DR-22WL can set name types of the recording files.
1. Use the F2 and F3
the parameter of the FILE NAME item and press the F4
button.
The FILE NAME screen will be displayed.
2. Use the . button and the / button, the F2
and the F3 button, and the F4
settings for different items.
The following settings for each item can be made in this
screen.
3. To return to the SYSTEM page of the menu screen, press the
F1
button.
8 File name type
In the TYPE item, select either the DATE or WORD options.
Options:
DATE (default value) : dates will be included in file name
Example: 140101_0000.wav
: the six characters set in WORD will
WORD
be included in file name
Example: TASCAM_0000.wav
NOTE
The internal clock of the unit is used to set dates. (See
"Setting the date/time" on page 11.)
buttons to select (highlight)
button
button to make
10 – Settings and Information
8 Setting characters (WORD)
In the WORD item, use either the . button or the / button
to move the cursor, and use the F2
to set characters.
In addition to alphabets and numbers, the following characters
can be used: ! # $ % & ' ( ) + , - . ; = @ ^ _ ' { } ~
8 Initializing the numbers (COUNT INIT)
In REC SETTING page of the menu screen, select the parameter
(highlight) the COUNT INIT item, and press the F4
The following confirmation message will appear:
Press the F3 button to reset the number that follows the
characters to "0001".
and the F3 buttons
button.
43
TASCAM DR-22WL