Using Wi-Fi; Connect The Dr-22Wl And Smart Phone Via Wi-Fi; How To Download And Install The Exclusive Application (Dr Control); Selecting The Wi-Fi Mode - Tascam DR-22WL Reference Manual

Connect the DR-22WL and smart
phone via Wi-Fi
CAUTION
The DR-22WL designs are in conformance with the laws and
regulations of the countries and regions in which this unit is
sold, and labeled as required.
The DR-22WL is approved in the following countries and
regions:
United States, Canada, Europe (EU member states),
Australia, New Zealand, Japan
The use of wireless functions in a country other than those
listed above could result in a violation of that country's
wireless transmission laws.
Our company will bear no responsibility for use in countries
other than those listed above.
TIPS
The battery will drain faster during Wi-Fi use.
Running out of batteries during data transfer will terminate
the process and may result in transfer failure.
We recommend to use either the AC adapter or USB bus
power during Wi-Fi use.
The DR-22WL is designed for remote control with the use of an
exclusive application (DR CONTROL), free of charge.
Transport control such as playback and stop, as well as input
level adjustment and file transfer can be made via Wi-Fi.
How to download and install the exclusive
application (DR CONTROL)
1. Connect your smart phone to the Internet.
2. Search the exclusive application (DR CONTROL) and
download from either Google Play (Android smart phone) or
App Store (iOS device) for installation.

Selecting the Wi-Fi mode

You can choose from two connection modes according to the
use conditions.

8 TO DEVICE mode

This unit operates as an access point, and computers,
smartphones and other external devices can connect to it by Wi-Fi.
8 VIA ROUTER mode
This unit can connect to computers, smartphones and other
external devices by Wi-Fi through an existing Wi-Fi router.
This allows more flexibility. This also enables simultaneous
connection to the Internet, allowing easier file sharing and
location information checking, for example.
9 – Using Wi-Fi
Connecting the unit directly to external
devices (smartphones, tablets and
computers) by Wi-Fi (TO DEVICE mode)
8 Setting the Wi-Fi mode to TO DEVICE
1. Press the /MENU/8 button to display the menu screen.
2. Press the F1
button to display the SETUP page.
3. Use the F2 and F3
buttons to select (highlight) the
Wi-Fi item parameters.
4. Press the F4
button to display the Wi-Fi screen.
5. Use the F2 and F3 buttons to select (highlight) the
MODE item parameters and press the F4
6. Use the F2 and F3 buttons to set the Wi-Fi mode to
TO DEVICE .
Options: TO DEVICE (default value),VIA ROUTER
Connecting the DR-22WL to a smart phone
via Wi-Fi for the first time
The DR-22WL can make a Wi-Fi/peer-to-peer connection with
a smart phone via Wi-Fi, without the use of a router or other
external devices. No Wi-Fi network environment is required. It
can make direct connection with your smart phone.
NOTE
When this unit and a smartphone are connected by Wi-Fi,
connection with other Wi-Fi networks will not be possible.
1. Press the Wi-Fi button of the unit to make the Wi-Fi
indicator blink.
A CONNECT NEW? pop-up message appears on the display to
determine whether or not the connection is new.
2. You will be making a connection to a new smartphone, so
press the F3 button.
3. SSID and PASSWORD appear on the display.
button.
35
TASCAM DR-22WL