Using The Built-In Microphone; Screen Overview - Tascam DR-07X Owner's Manual

DATE/TIME
Set the date and time.
Use the . and / buttons to move the cursor, and use
the + and − buttons to change the date and time.
Press the y button to confirm.
TIP
The language and date/time settings can be changed
later from the menu.

Using the built-in microphone

This unit's built-in microphones can be adjusted, allowing
the angles of the microphones to be changed. You can
choose clear stereo sound or wide stereo sound according
to the recording source, situation, etc. by opening or closing
the microphone pair.
Setting the mics to record a wide stereo sound
(A-B position)
Spread the stereo microphone to the left and right. (A-B
position)
Set this way, the two microphones are spread widely left
and right, and recording is possible with a strong stereo field
that is good for music, for example.
If you open or close the microphone pair while using the
built-in stereo microphone and the left-right channels does
not suit the angle of the microphone, a pop-up message
appears to ask whether you want to swap the left-right
channels of the microphone.
8
TASCAM DR-07X
CAUTION
Set the left-right channels of the built-in microphone to
L-R.
When you are using the built-in microphone and the
setting is not L-R, appears on the Home screen.
Setting the mics to record a clear stereo sound (X-Y
position)
Close the stereo microphone. (X-Y position)
Set this way, the microphone pair is close, and recording is
possible with a clear stereo field with less phase difference.
If you open or close the microphone pair while using the
built-in stereo microphone and the left-right channels does
not suit the angle of the microphone, a pop-up message
appears to ask whether you want to swap the left-right
channels of the microphone.
CAUTION
Set the left-right channels of the built-in microphone to
R-L. When you are using the built-in microphone and the
setting is not R-L, appears on the Home screen.

Screen overview

When stopped or playing back
1 P layback speed status
2 I nput mix function status
3 E ffect status
4 S peaker status
5 R emaining battery charge/power supply status
6 P layback status
7 Playback position
8 P layback level meters
9 P layback file name
0 E lapsed time
q R emaining time
w P eak value (decibels)
e P layback area
r P layback file number/total number of files
t O utput volume status