Connecting The Dr-22Wl To A Smart Phone Via; Wi-Fi (From Second Time Onward) - Tascam DR-22WL Reference Manual

9 – Using Wi-Fi
NOTE
The SSID is the name of the wireless LAN access point
(wireless LAN device).
4. Select "Settings" w "Wi-Fi" on the device.
iOS device example
5. When Wi-Fi is enabled on for your device, it will display the
SSID list of Wi-Fi equipment. Select the SSID displayed on
the DR-44WL.
iOS device example
6. A password input screen appears on the device. Enter the
password shown on the display of the unit.
7. Wi-Fi connection is established between the DR-22WL and
your smart phone, and the Wi-Fi indicator of the unit will
light.
NOTE
The above description on operating the device are for
reference only. Please refer to your smart phone's operation
manual for more details.
36
TASCAM DR-22WL
Android device example
Android device example
Connecting the DR-22WL to a smart phone
via Wi-Fi (from second time onward)
When you establish a connection between the DR-22WL and
your smart phone for the first time and need to connect them
again, you only need to select the SSID from the second time
onward.
1. Press the Wi-Fi button of the unit to make the Wi-Fi
indicator blink.
A CONNECT NEW? pop-up message appears on the display to
determine whether or not the connection is new.
2. You will be making a connection to a previously connected
smartphone, so press the F2
3. The pop-up message on the display disappears and the unit
waits for a connection with a smartphone.
4. In your device, select "Settings" w "Wi-Fi".
5. When Wi-Fi is enabled on for your device, it will display the
SSID list of Wi-Fi equipment. Select the SSID displayed on
the DR-22WL.
6. A Wi-Fi connection between the unit and your smartphone
is established and the Wi-Fi indicator is lit.
NOTE
The above description on operating the device are for
reference only. Please refer to your smart phone's operation
manual for more details.
8 Checking connection information
1. When the Wi-Fi screen is open, use the F2
buttons to select the INFO item, and press the F4
to select the parameter.
2. Press the F4
button to open the INFORMATION Screen.
SSID and PASSWORD information appears.
The SSID is used to identify this unit on the Wi-Fi network.
The PASSWORD is necessary when connecting to this unit by
Wi-Fi.
NOTE
Press the F4 button to change the password.
button.
and F3
button