Adding Marks Automatically When The Peak Indicator Lights - Tascam DR-22WL Reference Manual

8. Use the F2 and F3
automatically add cue marks.
Options: -6dB, -12dB (default value), -24dB, -48dB
9. Press the F4 button to finalize the set mode.
10. Press the /MENU/8 button to return to the home screen.
8 Add cue marks automatically according to set time
1. Press the /MENU/8 button to display the menu screen.
2. Press the F1
button to open the REC SETTING menu
page.
3. Use the F2 and the F3
the parameter of the AUTO FUNC item and press the F4
button.
AUTO FUNCTION screen is displayed.
4. Use the F2 and F3
MODE in the AUTO MARK item, and press the F4
5. Use the F2 and F3
mark mode to TIME.
Options: OFF (default value), LEVEL, TIME
6. Press the F4
button to finalize the set mode.
7. Use the F2 and F3
the LVL/TIME in the AUTO MARK item, and press the F4
button.
This shows the LVL/TIME item parameters.
8. Use the F2 and F3
automatically add cue marks.
Options: 5min, 10min, 15min, 30min, 60min (default value)
9. Press the F4 button to finalize the set time.
/MENU/8 button to return to the home screen.
10. Press the
buttons to set a level to
buttons to select (highlight)
buttons to select (highlight) the
button.
buttons to set the automatic cue
buttons to select (highlight)
buttons to set a time to
Adding marks automatically when the PEAK
indicator lights
The unit can add marks automatically when the PEAK indicator
lights during recording.
1. Press the /MENU/8 button to open the menu screen.
2. Press the F1
button to open the REC SETTING page.
3. Use the F2 and F3
buttons to select AUTO FUNC, and
press the F4
button.
The AUTO FUNCTION screen opens.
4. Use the F2 and F3 buttons to select PEAK MARK, and
press the F4 button.
The PEAK MARK parameters will be shown.
5. Use the F2 and F3
buttons to turn the PEAK MARK
function ON.
Options: OFF (default), ON
6. Press the F4
button to confirm the setting.
7. After completing the setting, press the
to return to the Home Screen.
NOTE
• Marks are added two seconds before a PEAK indicator
lights.
• For 10 seconds after a mark is added because a PEAK
indicator lit, no other mark will be added if the PEAK
indicator lights again or an automatic mark would normally
be added according to the LEVEL setting.
• Marks added because of a PEAK indicator lighting will not
cause division when the automatic division function is used.
4 – Recording
/MENU/8 button
23
TASCAM DR-22WL