Tascam DR-70D Release Notes

Updates

Always use the most recent firmware for this device.
Please visit the TEAC Global Site at http://teac-global.com
to check for the latest firmware.

New functions

V1.10 additions

• MID has been added to the mic input gain options
has been added to the
MID
screen.
BASIC
Options: , (new option),
LOW MID
• Operation has been changed so that now when
stopped and the Home Screen is open, pressing and
holding the ENTER button allows monitor selection
of the
MONITOR SEL
screen.
SETTING
Changing the format
•
The following options have been headed to the
item on the
FORMAT SYSTEM
Options
QUICK FORMAT
information only.
ERASE FORMAT
information and initializes by erasing all user data
areas on the SD card.
NOTE
Using the
ERASE FORMAT
SD card that has decreased writing performance, but
this process takes some time.

Maintenance items

V1.10 fixes

• If was selected for the
CAM
on the
MONITOR SETTING
sometimes output when playback was stopped. This
has been fixed.
• If recording was started when
for the
MONITOR SEL
screen, the monitoring mode shown on
SETTING
the Home Screen at the start of recording becomes
. Before it remained
MIX
was stopped, but this has been changed so that it
returns to .
CAM
• Operation stability has been improved.

V1.02 fixes

• A problem with not being able to show the remaining
time on the media correctly has been fixed.
D01252100C
options on the
GAIN
,
HIGH HI+PLUS
item on the
MONITOR
screen.
: Initializes file system
: Initializes file system
option might restore an
item
MONITOR SEL
screen, noise was
was selected
CAM
item on the
MONITOR
even when recording
MIX
DR-70D
• For the settings on the
4CH
and
LIMITER LOW CUT
other than , the Home Screen icon would not
OFF
change. This has been fixed.
• The performance of searching backward during
playback has been improved.
• The length of the tone recorded using the auto tone
function has been adjusted.
• If media formatted by this unit was inserted in another
DR series device, there was a problem with creating
two folders ("MUSIC" and "UTILITY"). This has been
fixed.
• If the
FILE TYPE
OUTPUT GAIN
recorded at −30 dB. This has been fixed.
• Operation stability has been improved.

Confirmation of firmware version

Confirm the firmware version of your DR-70D before
conducting a firmware update.
1. Turn the unit's power ON.
2. Press the MENU button to open the
3. Turn the DATA dial to select the
press the DATA dial to open the
4. Turn the DATA dial to select the
item, and press the DATA dial to open the
screen
MATION PROJECT(1/3)
5. Turn the DATA dial to open the
where you can check the
shows the firmware version.
If the
System Ver.
newer than the firmware version that you planned to
update to, then there is no need to update it.
Release Notes
screen, if the
INPUT
items were set to anything
was set to and the
2MIX
was set to , audio would be
CAM
screen.
MENU
item, and
OTHERS
submenu.
OTHERS
INFORMATION
INFOR-
page.
SYSTEM(3/3)
item that
System Ver.
shown here is the same or
TASCAM DR-70D
page
1