Selecting Files; Changing The Playback Speed; Using I/O Loop Playback - Tascam DR-07X Owner's Manual

Operations during playback
Pause playback Press the 8 button
Press and hold the /
Search forward
button
Press and hold the .
Search backward
button
Press the . button once
Skip to start of playing file
briefly
Skip to start of file before Press the . button twice
playing file briefly
Skip to start of file after Press the / button once
playing file briefly
Go back the set amount of
time (options: OFF, 1 sec, 3 Press the y button during
sec, 5 sec, 10 sec, 30 sec, 1 playback
min, 5 min, 10 min)
Press the MARK button
Add a mark
during playback

Selecting files

1.
Press the MENU button.
The MENU screen will open.
2.
Use the + and − buttons to select BROWSE, and press
7.
The Browse screen will open.
3.
Use the + and − buttons to select a file, and press
/.
The Home screen will reopen.
TIP
Press the 7 button to start playback and return to the
Home screen.

Changing the playback speed

1.
Press the PB CONT button.
The Playback Control screen will open.
2.
Use the + and − buttons to change the playback
speed.
The playback speed can be adjusted in a range from
50% (0.5) to 200% (2.0).

Using I/O loop playback

Use this function to repeat playback between two set points
(IN and OUT).
1.
Press the PB CONT button.
The Playback Control screen will open.
2.
Press the 7 button to start playback.
3.
Press the MARK button to set the IN (starting) point.
4.
Press the MARK button to set the OUT (ending)
point.
When the OUT point is set, I/O loop playback will start.
TIP
During I/O loop playback, press the MENU button to
end I/O loop playback while retaining the set IN and OUT
points.
5.
Press the MARK button to clear the IN and OUT
points.
TASCAM DR-07X
11