Maintenance; Protecting The Environment - Stanley STEL680 Manual

Replacing Carbon Brushes (fig. D)
• Use a screwdriver to remove the brush holder cap.
• Take out the worn carbon brush, insert the new one and
secure the brush hold cap.
Warning! Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark.
Accessories
The performance of your tool depends on the accessory used.
Stanley and Piranha accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best from
your tool.

Maintenance

Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
• Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.

Protecting the environment

Separate collection. This product must not
bedisposed of with normal household waste.
Should you find one day that your Stanley productneeds
replacement, or if it is of no further use to you, do notdispose
of it with household waste. Make this productavailable for
separate collection.
Separate collection of used products and packagin-
gallows materials to be recycled and used
again.Re-use of recycled materials helps preventenvi-
ronmental pollution and reduces the demand forraw
materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
ENGLISH
5