STANLEY, The STANLEY Logo, The Notched Rectangle and the Yellow and Black Diagonal Package Design are all trademarks of Stanley Black & Decker, Inc. or an affiliate thereof.
14 mildew formation. to prevent mold or mildew awG or better power cord. formation this blower should be used in unison Model ST-700-DR-E: with a dehumidifier. 4. Push power switch on top of blower to the Ventilation and Cooling “oN”...
Plug Replacement WARNING RISK OF ELECTRIC SHOCK! DISCONNECT FROM POWER BEFORE MAINTENANCE. NOTE: This section only applies to blowers sold or used in Great Britain. this appliance is supplied with a bS1363 3 pin the blue wire must be connected to the terminal plug fitted with a fuse.
Maintenance Risk Of Injury! Always disconnect the blower from the power source WARNING before maintenance. ELECTRICAL SYSTEM EXTERNAL PARTS Check the power cable regularly for damage. Check all external parts to ensure they have been installed properly. be alert for unusual noises. If the power cable is damaged, it must be replaced by qualified person or a service agent.
Need help?
Do you have a question about the ST-700-DR-E and is the answer not in the manual?
Questions and answers