Pci-E X4 Slots - Seco COM-Express CCOMe-C96 User Manual

Table of Contents

Advertisement

PCI-e x4 Slots

CCOMe-C96 board offer a possibility of expansion through two standard PCI-e x4 card edge connectors, type WINWIN p/n WPES-
064AN41B22UWC or equivalent, with the pinout shown in the following table.
On first slot CN12, are carried out PCI-e lanes #0..#3 coming from COM Express connector (rows A-B).
On second slot CN14, are carried out PCI-e lanes #4..#7 coming from COM Express connector (rows A-B-C-D).
Please be aware that availability of all eight PCI express lanes depends on the COM Express module used.
Please check the User Manual of the COM Express module used for details about the availability of these lanes and all possible groupings that can be applied to
these lanes.
On CCOMe-C96 carrier board, the PCI-express compatibility is ensured with devices up to Gen3.
Description
+12V Power Rail
+12V Power Rail
+12V Power Rail
Power Ground
SM Bus Clock line. +3.3V_RUN electrical level with
up resistor, derived by SMB_CK with
mosfet voltage level converter
SM Bus Data line. +3.3V_RUN electrical level with
up resistor, derived by SMB_DAT with
mosfet voltage level converter
Power Ground
+3.3V Power Rail
Not Connected
+3.3V Auxiliary Power Rail
Wake signal for link reactivation
Not Connected
CCOMe-C96
CCOMe-C96 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by C.M. Copyright © 2021 SECO S.p.A.
PCI-e x 4 Slot CN12
Pin name
Pin nr.
Pin nr.
+12V_RUN
B1
A1
+12V_RUN
B2
A2
+12V_RUN
B3
A3
GND
B4
A4
PCIE_ SMB_CLK
B5
A5
PCIE_ SMB_DAT
B6
A6
GND
B7
A7
+3.3V_RUN
B8
A8
JTAG1
B9
A9
+3.3V_ALW
B10
A10
WAKE0#
B11
A11
RSVD
B12
A12
Pin name
Description
PRSNT1#
Hot Plug presence detect (tied to GND)
+12V_RUN
+12V Power Rail
+12V_RUN
+12V Power Rail
GND
Power Ground
JTAG2
Not connected
Not connected
JTAG3
JTAG4
Not connected
JTAG5
Not connected
+3.3V_RUN
+3.3V Power Rail
+3.3V_RUN
+3.3V Power Rail
Reset signal to the add-in card, derived by
CB_RESET# using a Ultra High Speed CMOS
PCIEx4_1_RST#
buffer. Active low signal, +3.3V_ALW electrical level
with a 100k
GND
Power Ground
35

Advertisement

Table of Contents
loading

Table of Contents